Question about pin numbering
The card pinout shows that detect_switch is on pin 9, but your model has it on pin 10.
Will this affect the required function of detection?
Added 2 days, 21 hours ago.
2 Answers
Hello Yathish
Thanks for reaching us and for reporting this issue. We are going to investigate it, and we will get back to you as soon as we have an update.
Have a nice day.
Answered 2 days, 16 hours ago.
Hello Yathish
Thank you for your patience while we reviewed your feedback. :)
Upon review, we confirmed that the DETECT SWITCH connection is assigned to the correct pad in the footprint, which is Pad 10. The confusion may come from the DETECT LEVER MOUNT AREA, which corresponds to Pad 9 and is connected to VSS.
To clarify
DETECT SWITCH mount area connects to the Detect Switch signal and is assigned to Pad 10
DETECT LEVER mount area is a mechanical feature, assigned to Pad 9, and tied to VSS
For additional clarification, please refer to page 2 of the datasheet at the link below
https://www.molex.com/content/dam/molex/molex-dot-com/products/automated/en-us/salesdrawingpdf/503/503398/5033981892_sd.pdf
Please do not hesitate to reach out if you have any follow up questions or need further clarification. We are happy to help. :)
Best Regards
Amina
Answered 2 days, 13 hours ago.